Sprachen:
The source document for this Digest states:
- Bioenergy covers approximately 10 percent of total world energy supply. Traditional unprocessed biomass accounts for most of this, but commercial bioenergy is assuming greater importance.
Source & ©: FAO, The State of Food and Agriculture, Part I: Biofuels: Prospects, Risks and Opportunities (2008)
Chapter 2, Section Key messages, p.22
Traditional biomass, including fuelwood, charcoal and animal dung, continues to provide important sources of energy in many parts of the world. Bioenergy is the dominant energy source for most of the world’s population who live in extreme poverty and who use this energy mainly for cooking. More advanced and efficient conversion technologies now allow the extraction of biofuels – in solid, liquid and gaseous forms – from materials such as wood, crops and waste material. This chapter provides an overview of biofuels. What are they, what is their potential and what are their implications for agriculture? The main focus, however, is on liquid biofuels for transport, which are now gaining in prominence as a result of the rapid increase in their use.
Types of biofuels
Biofuels are energy carriers that store the energy derived from biomass.* [For a review of terminology relating to biofuels, see FAO (2004a) UBET – Unified Bioenergy Terminology. Rome.] A wide range of biomass sources can be used to produce bioenergy in a variety of forms. For example, food, fibre and wood process residues from the industrial sector; energy crops, short-rotation crops and agricultural wastes from the agriculture sector; and residues from the forestry sector can all be used to generate electricity, heat, combined heat and power, and other forms of bioenergy. Biofuels may be referred to as renewable energy because they are a form of transformed solar energy.
Biofuels can be classified according to source and type. They may be derived from forest, agricultural or fishery products or municipal wastes, as well as from agro- industry, food industry and food service by-products and wastes. They may be solid, such as fuelwood, charcoal and wood pellets; liquid, such as ethanol, biodiesel and pyrolysis oils; or gaseous, such as biogas. A basic distinction is also made between primary (unprocessed) and secondary (processed) biofuels:
- Primary biofuels, such as firewood, wood chips and pellets, are those where the organic material is used essentially in its natural form (as harvested). Such fuels are directly combusted, usually to supply cooking fuel, heating or electricity production needs in small- and large- scale industrial applications.
- Secondary biofuels in the form of solids (e.g. charcoal), liquids (e.g. ethanol, biodiesel and bio-oil), or gases (e.g. biogas, synthesis gas and hydrogen) can be used for a wider range of applications, including transport and high-temperature industrial processes.
Source & ©: FAO, The State of Food and Agriculture, Part I: Biofuels: Prospects, Risks and Opportunities (2008)
Chapter
2, p.10-11
The source document for this Digest states:
- Liquid biofuels for transport are generating the most attention and have seen a rapid expansion in production. However, quantitatively their role is only marginal: they cover 1 percent of total transport fuel consumption and 0.2–0.3 percent of total energy consumption worldwide.
Source & ©: FAO, The State of Food and Agriculture, Biofuels: Prospects, Risks and Opportunities (2008)
Chapter
2, Key messages, p.22
Liquid biofuels for transport*
[This section is based on GBEP (2007, pp. 2–10) and IEA (2004).]
In spite of their limited overall volume (see Figure 5), the strongest growth in recent years has been in liquid biofuels for transport, mostly produced using agricultural and food commodities as feedstocks. The most significant are ethanol and biodiesel.
Any feedstock containing significant amounts of sugar, or materials that can be converted into sugar such as starch or cellulose, can be used to produce ethanol. Ethanol available in the biofuel market today is based on either sugar or starch. Common sugar crops used as feedstocks are sugar cane, sugar beet and, to a lesser extent, sweet sorghum. Common starchy feedstocks include maize, wheat and cassava. The use of biomass containing sugars that can be fermented directly to ethanol is the simplest way of producing ethanol. In Brazil and other tropical countries currently producing ethanol, sugar cane is the most widely used feedstock. In OECD countries, most ethanol is produced from the starchy component of cereals (although sugar beet is also used), which can be converted fairly easily into sugar. However, these starchy products represent only a small percentage of the total plant mass. Most plant matter is composed of cellulose, hemicellulose and lignin; the first two can be converted into alcohol after they have first been converted into sugar, but the process is more difficult than the one for starch. Today, there is virtually no commercial production of ethanol from cellulosic biomass, but substantial research continues in this area (see the section on second-generation biofuels on pp. 18–19).
Ethanol can be blended with petrol or burned in its pure form in slightly modified spark-ignition engines. A litre of ethanol contains approximately 66 percent of the energy provided by a litre of petrol, but has a higher octane level and when mixed with petrol for transportation it improves the performance of the latter. It also improves fuel combustion in vehicles, thereby reducing the emission of carbon monoxide, unburned hydrocarbons and carcinogens. However, the combustion of ethanol also causes a heightened reaction with nitrogen in the atmosphere, which can result in a marginal increase in nitrogen oxide gases. In comparison with petrol, ethanol contains only a trace amount of sulphur. Mixing ethanol with petrol, therefore, helps to reduce the fuel’s sulphur content and thereby lowers the emissions of sulphur oxide, a component of acid rain and a carcinogen.
Biodiesel is produced by combining vegetable oil or animal fat with an alcohol and a catalyst through a chemical process known as transesterification. Oil for biodiesel production can be extracted from almost any oilseed crop; globally, the most popular sources are rapeseed in Europe and soybean in Brazil and the United States of America. In tropical and subtropical countries, biodiesel is produced from palm, coconut and jatropha oils. Small amounts of animal fat, from fish- and animal-processing operations, are also used for biodiesel production. The production process typically yields additional by-products such as crushed bean “cake” (an animal feed) and glycerine. Because biodiesel can be based on a wide range of oils, the resulting fuels can display a greater variety of physical properties, such as viscosity and combustibility, than ethanol.
Biodiesel can be blended with traditional diesel fuel or burned in its pure form in compression ignition engines. Its energy content is 88–95 percent of that of diesel, but it improves the lubricity of diesel and raises the cetane value, making the fuel economy of both generally comparable. The higher oxygen content of biodiesel aids in the completion of fuel combustion, reducing emissions of particulate air pollutants, carbon monoxide and hydrocarbons.
As with ethanol, diesel also contains only a negligible amount of sulphur, thus reducing sulphur oxide emissions from vehicles.
Straight vegetable oil
Straight vegetable oil (SVO)* is a potential fuel for diesel engines that can be produced from a variety of sources, including oilseed crops such as rapeseed, sunflower, soybean and palm. Used cooking oil from restaurants and animal fat from meat-processing industries can also be used as fuel for diesel vehicles.
* [Also referred to as pure plant oil (PPO)]
Editor’s Note: Biofuels must be blended in accordance with fuel specifications to give acceptable performance and avoid problems in conventional vehicles. Particularly for SVO, special vehicle modifications are needed.
Source & ©: FAO, The State of Food and Agriculture, Part I: Biofuels: Prospects, Risks and Opportunities (2008)
Chapter
2, Section Liquid biofuels for transport, p.11-13
The source document for this Digest states:
- Second-generation biofuels currently under development would use lignocellulosic feedstocks such as wood, tall grasses, and forestry and crop residues. This would increase the quantitative potential for biofuel generation per hectare of land and could also improve the fossil energy and greenhouse gas balances of biofuels. However, it is not known when such technologies will enter production on a significant commercial scale.
Source & ©: FAO, The State of Food and Agriculture, Part I: Biofuels: Prospects, Risks and Opportunities (2008)
Second-generation liquid biofuels*
* [This section is based on GBEP (Global Bioenergy Partnership) (2007) A review of the current state of bioenergy development in G8+5 countries. Rome, GBEP Secretariat, FAO., IEA (International Energy Agency) (2004) Biofuels for transport: an international perspective. Paris, OECD/IEA. and Rutz and Janssen (2007) Biofuel technology handbook. Munich, Germany, WIP Renewable Energies.]
Current liquid biofuel production based on sugar and starch crops (for ethanol) and oilseed crops (for biodiesel) is generally referred to as first-generation biofuels. A second generation of technologies under development may also make it possible to use lignocellulosic biomass. Cellulosic biomass is more resistant to being broken down than starch, sugar and oils. The difficulty of converting it into liquid fuels makes the conversion technology more expensive, although the cost of the cellulosic feedstock itself is lower than for current, first-generation feedstocks. Conversion of cellulose to ethanol involves two steps: the cellulose and hemicellulose components of the biomass are first broken down into sugars, which are then fermented to obtain ethanol. The first step is technically challenging, although research continues on developing efficient and cost-effective ways of carrying out the process. The lack of commercial viability has so far inhibited significant production of cellulose-based second-generation biofuels.
As cellulosic biomass is the most abundant biological material on earth, the successful development of commercially viable second-generation cellulose-based biofuels could significantly expand the volume and variety of feedstocks that can be used for production. Cellulosic wastes, including waste products from agriculture (straw, stalks, leaves) and forestry, wastes generated from processing (nut shells, sugar- cane bagasse, sawdust) and organic parts of municipal waste, could all be potential sources. However, it is also important to consider the crucial role that decomposing biomass plays in maintaining soil fertility and texture; excessive withdrawals for bioenergy use could have negative effects.
Dedicated cellulosic energy crops hold promise as a source of feedstock for second- generation technologies. Potential crops include short-rotation woody crops such as willow, hybrid poplars and eucalyptus or grassy species such as miscanthus, switchgrass and reed canary grass. These crops present major advantages over first- generation crops in terms of environmental sustainability. Compared with conventional starch and oilseed crops, they can produce more biomass per hectare of land because the entire crop is available as feedstock for conversion to fuel. Furthermore, some fast- growing perennials such as short-rotation woody crops and tall grasses can sometimes grow on poor, degraded soils where food- crop production is not optimal because of erosion or other limitations. Both these factors may reduce competition for land with food and feed production. On the downside, several of these species are considered invasive or potentially invasive and may have negative impacts on water resources, biodiversity and agriculture.
Second-generation feedstocks and biofuels could also offer advantages in terms of reducing greenhouse gas emissions. Most studies project that future, advanced fuels from perennial crops and woody and agricultural residues could dramatically reduce life-cycle greenhouse gas emissions relative to petroleum fuels and first- generation biofuels. This stems from both the higher energy yields per hectare and the different choice of fuel used in the conversion process. In the current production process for ethanol, the energy used in processing is almost universally supplied by fossil fuels (with the exception of sugar- cane-based ethanol in Brazil, where most of the energy for conversion is provided by sugar-cane bagasse). For second-generation biofuels, process energy could be provided by left-over parts of the plants (mainly lignin).
While cellulosic biomass is harder to break down for conversion to liquid fuels, it is also more robust for handling, thus helping to reduce its handling costs and maintain its quality compared with food crops. It is also easier to store, especially in comparison with sugar-based crops, as it resists deterioration. On the other hand, cellulosic biomass can often be bulky and would require a well- developed transportation infrastructure for delivery to processing plants after harvest.
Significant technological challenges still need to be overcome to make the production of ethanol from lignocellulosic feedstocks commercially competitive. It is still uncertain when conversion of cellulosic biomass into advanced fuels may be able to contribute a significant proportion of the world’s liquid fuels. Currently, there are a number of pilot and demonstration plants either operating or under development around the world. The speed of expansion of biochemical and thermochemical conversion pathways will depend upon the development and success of pilot projects currently under way and sustained research funding, as well as world oil prices and private-sector investment.
In summary, second-generation biofuels based on lignocellulosic feedstocks present a completely different picture in terms of their implications for agriculture and food security. A much wider variety of feedstocks could be used, beyond the agricultural crops currently used for first- generation technologies, and with higher energy yields per hectare. Their effects on commodity markets, land-use change and the environment will also differ – as will their influence over future production and transformation technologies (see Box 2).
Source & ©: FAO, The State of Food and Agriculture, Part I: Biofuels: Prospects, Risks and Opportunities (2008)
Chapter
2, Second-generation liquid biofuels, p. 18-19
The main liquid biofuels are ethanol and biodiesel. Both can be produced from a wide range of different feedstocks. The most important producers are Brazil and the United States of America for ethanol and the EU for biodiesel.
- Current technologies for liquid biofuels rely on agricultural commodities as feedstock. Ethanol is based on sugar or starchy crops, with sugar cane in Brazil and maize in the United States of America being the most significant in terms of volume. Biodiesel is produced using a range of different oil crops.
- Large-scale production of biofuels implies large land requirements for feedstock production. Liquid biofuels can therefore be expected to displace fossil fuels for transport to only a very limited extent.
- Even though liquid biofuels supply only a small share of global energy needs, they still have the potential to have a significant effect on global agriculture and agricultural markets because of the volume of feedstocks and the relative land areas needed for their production.
Source & ©: FAO, The State of Food and Agriculture, Part I: Biofuels: Prospects, Risks and Opportunities (2008)
Chapter
2, Section Key messages, p.22
There are many supply sources of biomass for energy purposes, scattered across large and diverse geographical areas. Even today, most energy derived from biomass used as fuel originates from by-products or co-products of food, fodder and fibre production. For instance, the main by- products of forest industries are used to produce fuelwood and charcoal, and black liquor (a by-product of pulp mills) is a major fuel source for bioelectricity generation in countries such as Brazil, Canada, Finland, Sweden and the United States of America. A considerable amount of heat and power is derived from recovered and/or recycled woody biomass and increasing amounts of energy are recovered from biomass derived from cropland (straw and cotton stalks) and forest land (wood chips and pellets). In sugar- and coffee-producing countries, bagasse and coffee husks are used for direct combustion and to produce heat energy and steam.
In terms of bioenergy, however, the big growth area in recent years has been in the production of liquid biofuels for transport using agricultural crops as feedstocks. The bulk of this has taken the form of ethanol, based on either sugar crops or starchy crops, or biodiesel based on oil crops.
As shown in Figure 6, a range of different crops can be used as feedstock for ethanol and biodiesel production. However, most global ethanol production is derived from sugar cane or maize; in Brazil, the bulk of ethanol is produced from sugar cane and in the United States of America from maize.
Other significant crops include cassava, rice, sugar beet and wheat. For biodiesel, the most popular feedstocks are rapeseed in the EU, soybean in the United States of America and Brazil, and palm, coconut and castor oils in tropical and subtropical countries, with a growing interest in jatropha.
Source & ©: FAO, The State of Food and Agriculture, Part I: Biofuels: Prospects, Risks and Opportunities (2008)
Chapter
2, Section Biofuel feedstocks, p.13-14
The source document for this Digest states:
Biofuels and agriculture
The current expansion and growth of energy markets, as a result of new energy and environment policies enacted over the past decade in most developed countries and in several developing countries, is reshaping the role of agriculture. Most significant is the sector’s increasing role as a provider of feedstock for the production of liquid biofuels for transport – ethanol and biodiesel. Modern bioenergy represents a new source of demand for farmers’ products. It thus holds promise for the creation of income and employment. At the same time, it generates increasing competition for natural resources, notably land and water, especially in the short run, although yield increases may mitigate such competition in the longer run. Competition for land becomes an issue especially when some of the crops (e.g. maize, oil palm and soybean) that are currently cultivated for food and feed are redirected towards the production of biofuels, or when food-oriented land is converted to biofuel production.
Currently, around 85 percent of the global production of liquid biofuels is in the form of ethanol (Table 1). The two largest ethanol producers, Brazil and the United States of America, account for almost 90 percent of total production, with the remainder accounted for mostly by Canada, China, the EU (mainly France and Germany) and India. Biodiesel production is principally concentrated in the EU (with around 60 percent of the total), with a significantly smaller contribution coming from the United States of America. In Brazil, biodiesel production is a more recent phenomenon and production volume remains limited. Other significant biodiesel producers include China, India, Indonesia and Malaysia.
Table 1 Biofuel production by country, 2007
Different crops vary widely in terms of biofuel yield per hectare, both across feedstocks and across countries and production systems, as illustrated in Table 2. Variations are due both to differences in crop yields per hectare across crops and countries and to differences in conversion efficiency across crops. This implies vastly different land requirements for increased biofuel production depending on the crop and location. Currently, ethanol production from sugar cane and sugar beet has the highest yields, with sugar-cane-based production in Brazil topping the list of in terms of biofuel output per hectare and India not far behind. Yields per hectare are somewhat lower for maize, but with marked differences between yields, for example, in China and in the United States of America. The data reported in Table 2 refer only to technical yields. The cost of producing biofuels based on different crops in different countries may show very different patterns. This is discussed further in Chapter 3.
Table 2 Biofuel yields for different feedstocks and countries.
Source & ©: FAO, The State of Food and Agriculture, Part I: Biofuels: Prospects, Risks and Opportunities (2008)
Chapter
2, Section Biofuels and agriculture, p.14-15
Potential for bioenergy
What is the potential for bioenergy production?The technical and economic potential for bioenergy should be discussed in the context of the increasing shocks and stress on the global agriculture sector and the growing demand for food and agricultural products that is a consequence of continuing population and income growth worldwide. What is technically feasible to produce may not be economically feasible or environmentally sustainable. This section discusses in more detail the technical and economic potential of bioenergy.
Because bioenergy is derived from biomass, global bioenergy potential is ultimately limited by the total amount of energy produced by global photosynthesis. Plants collect a total energy equivalent of about 75 000 Mtoe (3 150 Exajoule) per year (Kapur, 2004) – or six to seven times the current global energy demand. However, this includes vast amounts of biomass that cannot be harvested. In purely physical terms, biomass represents a relatively poor way of harvesting solar energy, particularly when compared with increasingly efficient solar panels (FAO, 2006a Impact of an increased biomass use on agricultural markets, prices and food security: a longer-term perspective, by J. Schmidhuber. Rome - available at www.fao.org/es/ESD/pastgstudies.html
). A number of studies have gauged the volume of biomass that can technically contribute to global energy supplies. Their estimates differ widely owing to different scopes, assumptions and methodologies, underscoring the high degree of uncertainty surrounding the possible contribution of bioenergy to future global energy supply. The last major study of bioenergy conducted by the International Energy Agency (IEA) assessed, on the basis of existing studies, the range of potential bioenergy supply in 2050 from a low of 1 000 Mtoe to an extreme of 26 200 Mtoe (IEA, 2006, pp. 412–16). The latter figure was based on an assumption of very rapid technological progress; however, the IEA indicates that a more realistic assessment based on slower yield improvements would be 6 000–12 000 Mtoe. A mid-range estimate of around 9 500 Mtoe would, according to the IEA, require about one- fifth of the world’s agricultural land to be dedicated to biomass production.
More important than the purely technical viability is the question of how much of the technically available bioenergy potential would be economically viable. The long-term economic potential depends crucially on assumptions concerning the prices of fossil energy, the development of agricultural feedstocks and future technological innovations in harvesting, converting and using biofuels. These aspects are discussed in further detail in Chapter 3.
A different way of looking at the potential for biofuel production is to consider the relative land-use requirements. In its “Reference Scenario” for 2030 in World Energy Outlook 2006, the IEA projects an increase in the share of the world’s arable land devoted to growing biomass for liquid biofuels from 1 percent in 2004 to 2.5 percent in 2030. Under its “Alternative Policy Scenario”, the share in 2030 increases to 3.8 percent. In both cases, the projections are based on the assumption that liquid biofuels will be produced using conventional crops. Should second-generation liquid biofuels become widely commercialized before 2030, the IEA projects the global share of biofuels in transport demand to increase to 10 percent rather than 3 percent in its Reference Scenario and 5 percent in the Alternative Policy Scenario. Land-use requirements would go up only slightly, to 4.2 percent of arable land, because of higher energy yields per hectare and the use of waste biomass for fuel production.
Nevertheless, this illustrates that, even under a second-generation scenario, a hypothetical large-scale substitution of liquid biofuels for fossil-fuel-based petrol would require major conversion of land. See also Chapter 4 for a further discussion, including regional impacts.
The potential for current biofuel technologies to replace fossil fuels is also illustrated by a hypothetical calculation by Rajagopal et al. (2007). They report theoretical estimates for global ethanol production from the main cereal and sugar crops based on global average yields and commonly reported conversion efficiencies. The results of their estimates are summarized in Table 3. The crops shown account for 42 percent of total cropland today. Conversion of the entire crop production to ethanol would correspond to 57 percent of total petrol consumption. Under a more realistic assumption of 25 percent of each of these crops being diverted to ethanol production, only 14 percent of petrol consumption could be replaced by ethanol. The various hypothetical calculations underline that, in view of their significant land requirements, biofuels can only be expected to lead to a very limited displacement of fossil fuels. Nevertheless, even a very modest contribution of biofuels to overall energy supply may yet have a strong impact on agriculture and on agricultural markets.
Table 3 Hypothetical potential for ethanol from principal cereal and sugar crops.
Source & ©: FAO, The State of Food and Agriculture, Part I: Biofuels: Prospects, Risks and Opportunities (2008)
Chapter
2, Section Potential for bioenergy, p.19-21
This summary is free and ad-free, as is all of our content. You can help us remain free and independant as well as to develop new ways to communicate science by becoming a Patron!
BECOME A PATRON!